油脂浸出设备的浸出流程大致分为以下几种类型
作者：admin
发布时间：2020-03-27
点击数：
油脂浸出设备；油脂浸出设备的浸出流程大致分为以下几种类型：
The leaching process of oil extraction equipment has the following types:(一点)将难浸物料和易浸物料分别浸出，榜首段浸出难浸物料，油脂浸出设备利用榜首段浸出矿浆中的剩余浸出剂进行二段易浸物料的浸出;
(first) refractory material and easily leachable materials were leached, top stage leaching of refractory materials, oil extraction equipment using top leaching pulp remaining leaching agent in the second paragraph easily leachable material leaching;
(二点)榜首段进行低酸浸时，油脂浸出设备以浸出易溶组分，浸出矿浆经固液分别后得出的浸出液可送后续处理，而浸出渣制浆后进行二段高酸浸出，以浸出难溶目的组分。
(2) the top section of low acid leaching, oil extraction equipment to extract soluble components, leaching pulp by solid-liquid were obtained after leaching solution can send follow-up treatment, and leaching slag slurry were the high acid leaching, to extract insoluble component.
高酸浸出矿浆经固液分别后复得到的浸出液返至榜首段浸出，以充分利用剩余试剂。这么既可降低试剂耗量，又可前进目的组分浸出率;
High acid leaching pulp by leaching liquid respectively after the return to the top of leaching, in order to make full use of residual reagent. So it can reduce the amount of reagent consumption, but also forward the purpose of the group of leaching rate;
(三点)用高价铁盐浸出硫化物材料时，油脂浸出设备为了习气后续电积的需求，可将榜首段氧化浸出所复得的浸出液送去二段进行恢复浸出，使剩余的高价离子被恢复为贱价离子。
(third) with high valent iron salt leaching sulfide materials, oil extraction equipment in order to habits in subsequent electrical product demand, top stage oxidation leaching of complex of leaching solution will be sent to the second stage leaching recovery, the multicharged ions remaining be recovered as distressed ion.
恢复浸出液送去电积，可降低进程电耗，而恢复浸出渣返至榜首段进行氧化浸出，这么既可前进浸出率，又可降低浸出试剂耗量和降低后续电积的电耗。
Sent to the electric product restore leaching solution, reducing process energy consumption and recovery of leaching residue back to the top of the section of oxidation leaching, so can forward leaching rate, but also can reduce the leaching reagent consumption and reduce the subsequent electrowinning in power consumption.
郑州企鹅拥有着可靠的设计，制造，上门安装调试，质量保证，如果您有任何问题，请与我们联系.0371-86661079
下面是我们为大家推介的油脂浸出设备；
拖链浸出器；http://www.oiljc.com/yzjcsb/13.html
环形浸出器；http://www.oiljc.com/yzjcsb/12.html
溶剂浸出；http://www.oiljc.com/yzjcsb/11.html
